Is anyone having a problem getting the doors fully open or having problems adjusting the doors on a OTIS 211 with a QL Operator ?

-- Will (mtnrambo@msn.com), March 06, 2005

Answers

Do a learn run. If it doesn't seem to work, make sure the cam is tight or hasn't moved.

Dan

-- Dan (justsomeguylookin2@hotmail.com), March 06, 2005.

Dan,

Done that, still can't get doors fully open... adjustments don't seem to work...

Have had this on service for a bit, got it right after free service expired...

Found out from a OTIS adjuster that there is an eeprom in the door operator specifically burned for that unit... When OTIS loses a contract they put a default eeprom in the operator so you won't have any adjustment...

Just curious if ya'll had similar problems...

-- Will (mtnrambo@msn.com), March 06, 2005.

We never changed any eproms in the units when we lost them. Never heard of a job specific prom for a QL.

Is the learn run failing when you run it? When did the problem start?

Make sure the inductors are close enough to the cam to pick it up, make sure they are making, and make sure that the cam is positioned right. It should just make on each limit of stroke. If someone screwed with it, and got it turned around the wrong way you'll have all kinds of problems.

Dan

-- Dan (justsomeguylookin2@hotmail.com), March 06, 2005.

Well, Well , Well, superman here has a problem and grovels to everyone..why dont u speak to all these contacts u have..this job should be like changing a fuse to u...ps i would call otis in..................

-- (groucho0@aol.com), March 07, 2005.

if you do whit the test tool a automatic learn run, you miss 4 imputs, you have to do set de lenght of the door, type motor, tld/co doors, than doorwidth, default = 900, maybe change this i look into it....

-- Luc van mensbrugge (lucvanmensbrugge@hotmail.com), March 07, 2005.

groucho0@aol.com,

Go find a light bulb to screw....

-- Will (mtnrambo@msn.com), March 07, 2005.

so if you could fix it why r u asking what to do then-ps if you have the guts print your name and address on this site, then we will see if all knobends like u work at tke or whoever u say...now from everyone on this INFORMATION SHARE SITE...why dont u go to iraq,they need lift engineers like u out there..............

-- (groucho0@aol.com), March 09, 2005.

groucho0@aol.com,

I bet you hit your head on your boss's desk every time you go in his office...

I bet your the little prick in your office that rat's on everyone...

I bet your the one in your office that has an underlying worry that everyone else in your office is making more than you...

And I also bet you can't set the time on your wrist watch... Or figure out the wiring on a door lock...

Your only STILL working as a temporary mechanic in the field because you can't get a job as an Inspector or a Union Delegate...

SO... GO SCREW YOUR LIGHTBULB, DICK !

-- Will (mtnrambo@msn.com), March 09, 2005.

groucho0@aol.com

you could learn a lot here if you just were smart enough to read the replies...

i posted the question only to throw something out here on this forum...

DAN answered it perfectly...

SO, go screw that lightbulb... dick

-- Will (mtnrambo@msn.com), March 09, 2005.

Why ask a question if u know it all anyway.....u should get yourself an agent... why sit in the dark handling yourself...................

-- (gruocho0@aol.com), March 10, 2005.